Blacksmithing is a 3,500-year-old profession. Blacksmiths were working on metal projects as far back as the Bronze Age. In the past, blacksmiths had to rely on manpower to get the job done, but nowadays, industrial blacksmithing power hammers are helping to make the work much more efficient.


The Blacksmithing profession has come a long way from manual labor to a more automated process. Blacksmiths no longer have to toil long hours over the same slab of metal; industrial blacksmithing power hammers now make the job easier. Additionally, metalworking products are of superior quality compared to what was produced in the past.


Blacksmiths have been around since the beginning of modern civilization. In fact, the blacksmith profession can be traced back to the Bronze Age (about 3000-1500 BC). Blacksmiths were the toolmakers and manufacturers of their time. They were responsible for constructing tools, weapons, and machinery out of bronze, steel, and iron. There were also decorative and architectural blacksmiths who made gates, fences, and artistic pieces.

When completing these projects in the past, Blacksmiths had to rely on pure manpower; they had to hammer steel and iron by hand. This is why many blacksmiths had to be strong and able-bodied.

Luckily, today there are industrial blacksmithing power hammers available for metalworking projects.


Compared to elbow grease, industrial blacksmithing power hammers have a lot to offer modern blacksmiths in the way of convenience and ease of use.

There are two main types of blacksmith power hammers: mechanical hammers and air hammers. Mechanical hammers use a crankshaft to power the machine, while air hammers are powered by air cylinders. These motorized hammers can deliver up to 500 pounds of force. The additional power allows modern blacksmiths to bend metal more accurately. You can easily adjust and move the metal you are working on, which helps shape the entire metal piece with greater precision. For example, if you need the metal to bend at a sharper angle in a certain place, you can set your blacksmithing hammer accordingly. So all in all, you will get a better quality product when you use a power hammer.


There are a few downsides to industrial blacksmithing power hammers. For one, these hammers are much more complicated to use as compared to a regular hammer. With the basic hammers Blacksmiths previously used, all that was required was a good grip on the handle and some manpower.

But you have to be trained to use an industrial blacksmithing power hammer because there are many settings to navigate. Also, a power hammer is a dangerous tool; you have to be sure that you are taking every safety precaution when using one of these machines.